Workpieces · Bleyweert MFG
Milled parts.
Up close.
A selection of milled parts from our own workshop. From pockets and contours to repeated components for a production batch.

Workpieces · Milling
Form. Detail. Repetition.
Take a closer look at the parts. Open a photo to see the complete image.
Milled housing
Internal pockets, bores and multiple faces in one part.
Milled parts in series
Repeated parts with rectangular recesses and side bores.
Wheel with open spokes
A circular outer rim and curved, open spokes.
Frame-shaped milled parts
A rectangular opening and four corner holes, repeated across a series.
Complex milled part
Round pockets, narrow ribs and bores on different faces.
On the shop floor · Milling
Inside the machine.
The workpiece, workholding and tooling: machining up close.
On the shop floor
Milling in motion
The cutter machines the clamped workpiece. The tilting table provides access to different sides.
Thread inspection on a complex milled part
Thread inspection with a thread gauge while the part is still in the machine.
Pockets and contours in the milling machine
Deep pockets, rounded contours and multiple machined faces in one setup.
Milling marks up close
Machined faces and a rounded corner, photographed up close inside the machine.
Four workpieces on the rotary table
Four parts set up together, each in its own vice on the rotary table.
The shape reveals the work.
We focus on aluminium milling for larger batches. We consider the part geometry, workholding and required quantities together, starting from your model and drawing.
Pockets and contours
Open geometries, bores and machined surfaces show the different sides of milling.
From model to part
A clear drawing connects the geometry to the dimensions, fits and finish you need.
Repeat production
For batch production, we discuss material, quantities and repeat orders as a whole.
Bleyweert MFG
Your model.
The next step.
Upload your STEP model for an indicative milling price. We can discuss any additional requirements or repeat production with you.
