FROM DRAWING TO MANUFACTURE

NexusNext CAD.

From drawing to 3D.

Explore the example or upload your own drawing. NexusNext processes your file; your result appears in the same workspace.

No account. Email only at the final step.How it works ↓
NexusNext CAD
Interactive example
Loading CAD options…
Mounting plateBM-DEMO-001
Technical drawingExample part
Mounting plate BM-DEMO-001 — 100 × 70 × 12 mmSchematic example drawing with top, front and right-side views. Rounded R6 corners, a central 28 mm through-hole and four 8 mm through-holes with centre distances of 76 by 46 mm.10070764612Ø28 THROUGH4 × Ø8 THROUGH4 × R6TOP VIEWFRONT VIEWRIGHT-SIDE VIEWBLEYWEERT MFGSCHEMATIC EXAMPLE · DIMENSIONS IN MMMOUNTING PLATEBM-DEMO-001100 × 70 × 12
The example drawing corresponds to the demo model shown.
100 × 70 × 12 mmØ 28 + 4 × Ø 8Example part

A clear process

Upload. Process. Check.

.PDF / .JPG
01 / UPLOAD

Start with your drawing.

A clear PDF or JPG with views and dimensions. Multiple drawing sheets? Combine them into one PDF.

NexusNextFrom view to geometry
02 / PROCESS

The step into three dimensions.

NexusNext reconstructs the geometry. What is possible depends on how complete your drawing is.

Your model and the next step.Personal result link
03 / CHECK & ESTIMATE

From STEP to your price estimate.

Check the STEP model and report, then confirm that the model matches your drawing. Next, choose the process, material and quantity. Your existing file and email address are reused; no further upload is needed.

A useful starting point

A good model
starts at the source.

Converting a technical drawing to STEP requires reconstructing its geometry. A clear drawing with complete dimensions, multiple views and relevant sections provides the best starting point.

Prefer the original PDF file. If using a scan or photo, make sure the whole drawing is sharp, straight and free of cropped dimensions. The result cannot reliably replace missing design information.

Compare the generated model with the drawing before using it in CAD, for costing or for production. Check smaller features too, such as holes, pockets and fillets.

Need help with your part? Contact us

From model to manufacture

Checked your STEP model?
Request your price estimate.

Check your STEP model and report and confirm that the model matches your original drawing. You can then continue on the same results page with a milling or turning estimate.

Choose the available process, material and required quantity. NexusNext uses the existing STEP file and your email address. Nothing needs to be uploaded again. If further review is needed, this is shown with the result.

Bleyweert MFG specialises in aluminium milling for larger production runs and CNC turning. Already have your own STEP model? Go straight to the online calculator.

Start with your drawing

Frequently asked questions

From PDF or JPG
to STP / STEP.

Can I convert a PDF drawing to a STEP file?

You can submit a technical drawing as PDF or JPG. NexusNext processes it to reconstruct the 3D geometry. If processing succeeds, you can download the STEP file and a report. Whether a usable model can be created depends, among other things, on the completeness and readability of the drawing.

What is the difference between STP and STEP?

STP and STEP are common file extensions for the same CAD exchange format. A STEP file contains 3D geometry and lets you exchange a model between CAD systems.

Which files can I upload?

You can add up to five PDF, JPG or JPEG files: up to 25 MB per file and 100 MB in total. Preferably combine drawing sheets of the same part into one PDF.

Is the generated STEP model ready for production?

Check the model and report first. Compare geometry, dimensions, holes and other features with the original drawing. Unclear or missing information can lead to an incomplete or incorrect model. A generated model is therefore not an automatic production release.

Do I need an account, and how do I receive the result?

No account is needed. Upload your drawing first and enter the requested details. Your email address comes last. When processing is complete, we email you a personal result link.

Can I then calculate a milling or turning price?

Yes. First check the STEP model and report and confirm that the model matches your drawing. Then choose an available process, material and quantity. We use the existing STEP file and your email address; no further upload is needed. Some parts require technical review and will not receive an automatic price.